• <button id="rf0bf"><acronym id="rf0bf"></acronym></button>

          <rp id="rf0bf"><acronym id="rf0bf"><input id="rf0bf"></input></acronym></rp>
          <rp id="rf0bf"></rp>

            <rp id="rf0bf"><acronym id="rf0bf"></acronym></rp>

            福州高特光電科技有限公司

            http://www.z-optics.com/images/AlphaBBO.jpgBBO (beta-BaB2O4) is an excellent non-linear crystal for frequency-doubling (SHG) of Visible and Near IR laser light, OPO/OPG/OPA pumped by ultrafast pulses of wavelengths in the Near IR to UV, and sum-frequency mixing (SFM) into the Visible to the deep UV. BBO is one of the few practical crystal for use below 500 nm in SHG and SFM.
            BBO crystal has broad tunability, high damage threshold, and high efficiency. BBO's small acceptance angle requires a very good beam quality and its large walkoff results in output beams that are very elliptical or slit-like. Type I is usually much more efficient than type II operation. BBO can not be used for NCPM (temperature tuned) application.
             

            BBO is very good for tunable laser sources, such as ultrafast Ti:Sapphire or dye lasers. And it is also widely used for SHG, 3HG, 4HG, and autocorrelation of femtosecond and picosecond Ti:Sapphire lasers; SHG, 3HG, 4HG, 5HG of YAG lasers at 1064 nm and 1320 nm to yield output of 212-660nm; SHG of tunable dye or solid-state laser sources from 410-750 nm to yield output of 205-375 nm, SFM of dye laser and YAG harmonics to yield output of 189-400 nm; DFM (difference-frequency mixing) from the Visible to the IR range up to over 3000 nm; OPO pumped with SHG or 3HG of YAG or Ti:Sapphire with an output range of 400-3000 ; Intracavity SHG of Argon ion lasers (488, 514 nm) or Copper vapor lasers (510 nm, 578 nm).

            Crystal Structure Trigonal, space group R3c
            Cell Parameters a = b = 12.532Ã, c = 12.717Ã…, Z = 6
            Melting point 1095+ 5°C
            Transition temperature 925+ 5°C
            Optical homogeneity d n ~ 10-6/cm
            Mohs hardness 4
            Density 3.85 g/cm3
            Absorption Coefficient < 0.1%/cm (at 1064nm)
            Specific heat 490 J/kg/°C
            Hygroscopic susceptibility low
            Thermal expansion coefficients a, 4 x 10-6/K; c, 36 x 10-6/K
            Thermal conductivity Perpendicular to c, 1.2 W/m/°C
            Parallel to c, 1.6 W/m/°C

            Linear Optical Properties

            Transparency range 189-3500 nm
            Refractive indices: ne = 1.5425, no = 1.6551 @ 1064 nm
            ne = 1.5555, no = 1.6749 @ 532 nm
            ne = 1.6146, no = 1.7571 @ 266 nm
            Therm-optic coefficients dno/dT = -9.3 x 10-6/°C
            dne/dT = -16.6 x 10-6/°C

            Sellmeier Equations (l in mm)

            no2 (l) = 2.7359 - 0.01354l2+ 0.01878/(l2-0.01822)
            ne2(l) = 2.3753 - 0.01516l2+ 0.01224/(l2-0.01667)

            Nonlinear Optical Properties

            Phase-matchable output wavelength 189 - 1750 nm
            NLO coefficients d11 = 5.8 x d36 (KDP)
            d31= 0.05 x d11
            d22 < 0.05 x d11
            Electro-optic coefficients y11 = 2.7 pm/V
            Half-wave voltage 48 KV (at 1064 nm)
            Damage threshold

             

            5 GW/cm2 (10 ns) @1064nm
            10 GW/cm2 (1.3 ns) @ 1064 nm
            1 GW/cm2 (10 ns) @532 nm
            7 GW/cm2 (250 ps) @ 532 nm

            Capabilities

            Material
            β-BBO Crystal
             
             
             
            Transparency Curve
            Thickness
            0.01mm-20mm
            Surface Quality
            10-5
            Optical Axis Orientation
            3 arc min
            Parallelism
            <10 ace sec
            Flatness
            λ/10@633nm
            Clear Aperture
            >95%
            Coating
            P-coating or AR coating
            Mount
            Upon Customer's Specification

            BBO Typical Specifications

            Thin crystals: (5-10) x (5-10) x (0.01 - 1) mm3
            Regular sizes: 4 x 4 mm2 to 20 x 20 mm2 in diameter, 3 - 20 mm in length

            Different cuts, sizes and AR coatings are available upon request.

            BBO is hygroscopic. In application, protective coating or AR coating or crystal housing is usually recommended.

            call us
            Email Us
            Copyright 2011, fzgaote.com, All Rights Reserved.create by 福州網站建設
            最近的中文字幕国语电影,亚洲精品无码久久一线,国模欢欢炮交啪啪150P,八戒八戒看片在线观看免费5